این
دورهی آموزشی تصویری علاوه بر آموزش
مفاهیم و مهارتهای آخرین نسخه از برترین
پلتفرم مجازیسازی یعنی VMware
vSphere 6،
کلیهی اطلاعات لازم برای کسب مدرک معتبر
VCP6-DCV
را
پوشش داده است.
در
این دوره مباحث اصولی شامل نصب، سازماندهی
و مدیریت همهجانبهی یک مرکز داده مجازی
با استفاده از VMware
vSphere v6 و
بسیاری مباحث و مفاهیم کلیدی دیگر مفصلاً
و عملاً در مدت زمان 12
ساعت
مورد موشکافی و تدریس قرار گرفتهاند.
حوزهی
تخصصی مرتبط:
مجازیسازی
(Virtualization)
مهارتهای
توصیه شده:
آشنایی
با مفاهیم اساسی مجازیسازی
آشنایی
با VMware
Workstation
آشنایی
با ویندوز سروِر 2012
آشنایی
با IP
networking
تجهیزات
توصیه شده:
Computer
with 16 GB of RAM (32GB preferred) and Intel VT or AMD-V support
VMware
Workstation (latest version)
SSD
hard disk(s) recommended
گواهینامههای
مرتبط:
VMware
Certified Professional (VCP6-DCV)
بسترهای
شغلی مرتبط با آموزش های این دوره:
IT
professionals
Server
administrators
Virtual
administrators
Storage
administrators
Network
administrators
محتوای
آموزش:
1-
آشنایی
با vSphere
6 ،
Hypervisor
و
محیط برنامه
2-
مباحث
مربوط به ESXi
3-
مباحث
مربوط به AD،
DNS
و
دیگر سرویس ها
4-
مباحث
vSphere
Windows Client و
آپشنهای vCenter
5-
گسترش
دادن vCSA
6-
گسترش
دادن یک VM
در
vSphere
7-
نصب
ابزارهای VMware
8-استفاده
از قالبهای VM
9-
OVA
،
OVF
و
اسنپشات ها
10-
vSphere
Networking و
ایجاد یک Virtual
Switch
11-
مبحث
Freesco
Router VM
و
مفاهیم و اقدامات مربوط به iSCSI
12-
ایجاد
NFS
Datastores
13-
vMotion و
استفاده از DRS
14-
مفاهیم
مربوط به Distributed
Switch و
Networking
Policy
15-
مهاجرت
VMK
port
به
VDS
16-
استفاده
از vApps
17-
مفاهیم
CPU
و
Memory
Control
18-
گسترش
دادن قیود و محدودیتها
19-
مفاهیم
مربوط به Resource
Pool
20-
استفاده
از Resource
Pools و
Storage
DRS
21-
مباحث
High
Availability (HA) و
VM
Fault Tolerance (FT)
22-
مباحث
Storage
Policy و
Applying
VM Storage Policies
23-
مبحث
Virtual
SAN (VSAN) و
اضافه کردن LDAP
به
SSO
24-
احراز
هویت و کسب اجازه در vSphere
25-
هشدارها
و احتیاطها در vSphere
26-
مفاهیم
Affinity
و
استفاده از Affinity
Rules
27-
مباحث
Customization
Specifications و
Content
Libraries
28-
محصولات،
ویژگیها و Fishing
Tools افزودنی
و
...
تولید
کننده:
CBT Nuggets
تاریخ
انتشار:
آگوست
2015
سطح:
متوسط
مدت
زمان آموزش:
12 ساعت
مدرس:
Keith Barker
فهرست
کامل سرفصلهای آموزش (به
همراه زمان دقیق آنها و توضیح)
:
1
Welcome
to vSphere 6 - 3 min
In
this Nugget, Keith provides a brief introduction, and highlights some
tools that will allow you to enjoy and get the most from this course.
Welcome
2
What
is a Hypervisor? - 9 min
In
this Nugget, Keith describes the function of a hypervisor, along with
the difference between a type 1 and type 2 hypervisor.
3
What
is vSphere? - 14 min
In
this Nugget, Keith describes the ingredients that go into the
infrastructure known as vSphere, including vCenter Server and ESXi
hosts.
4
Lab
Design and Preparation - 16 min
In
this Nugget, Keith describes how to create an entire vSphere lab
environment on a single physical computer. This video also includes
specific directions that should be followed in preparation for
deploying your own lab environment.
5
ESXi
as a Lab VM - 16 min
In
this Nugget, Keith explains and demonstrates the creation of an ESXi
VM (within VMware Workstation) as part of a lab environment.
6
ESXi
Initial Configuration - 12 min
In
this Nugget, Keith explains and demonstrates how to perform the
installation and initial configuration of an ESXi host using the
Direct Console User Interface (DCUI).
7
AD,
DNS & other Services - 13 min
In
this Nugget, Keith describes how to use a Windows server in the lab
network to provide AD, DNS, DHCP and File Services to the other
devices in the lab network. Features such as iSCSI, NFS, and DHCP
will be configured in later Nuggets in this course, as those specific
services are needed in the vSphere environment.
8
vSphere
Windows Client - 14 min
In
this Nugget, Keith discusses and demonstrates the Windows vSphere
client.
9
vCenter
Options - 9 min
In
this Nugget, Keith describes several options that are available when
deploying vCenter, Platform Services Controller, and their associated
services.
10
Deploying
the vCSA - 16 min
In
this Nugget, Keith demonstrates how to deploy the vCenter Server
Appliance (vCSA) as a VM running on an ESXi host.
11
vCSA
Hacked to run on Workstation - 16 min
In
this Nugget, Keith describes and demonstrates how to deploy the
vCenter Server Appliance (vCSA) as a VM on VMware Workstation. The
edits done to the .VMX file (as demonstrated in the Nugget) are
available in the NuggetLab files.
12
Add
ESXi Hosts to vCSA - 16 min
In
this Nugget, Keith demonstrates how to create objects in vCenter,
including folders, data centers, and clusters, and then how to add
ESXi hosts to vCenter.
13
Datastores
- 14 min
In
this Nugget, Keith describes some of the details regarding
datastores, and then demonstrates working with them.
14
Deploying
a VM in vSphere - 17 min
In
this Nugget, Keith walks you through the deployment of a VM in
vSphere using the vSphere Web Client.
15
Install
VMware Tools - 12 min
In
this Nugget, Keith describes some of the benefits of using VMware
Tools on VMs, and then demonstrates the installation of VMware Tools
on a Windows and Linux VM.
16
Using
VM Templates - 10 min
Int
this Nugget, Keith describes and demonstrates how to use templates to
create VMs in a vSphere environment.
17
OVA
and OVF - 16 min
In
this Nugget, Keith describes and demonstrates using Open
Virtualization Format to assist with the movement of VMs to other
environments.
18
Snapshots
- 14 min
In
this Nugget, Keith describes and demonstrates using a Snapshot in a
VMware environment.
19
Intro
to vSphere Networking - 12 min
In
this Nugget, Keith introduces the concepts of a virtual switch, VM
Port Groups, and VMKernel Ports.
20
Create
a Virtual Switch (13 min)
In
this Nugget, Keith demonstrates the creation of a new virtual switch
(vSwitch), along with an uplink and port group. Modifying a VM to
have it use a new port group is also demonstrated in this Nugget.
21
Freesco
Router VM - 16 min
In
this Nugget, Keith describes and demonstrate deploying a Freesco VM
in a VMware Workstation environment, as a DHCP and default Gateway
service to support the VMnet3 and VMnet4 networks.
22
iSCSI
Concepts - 10 min
In
this Nugget, Keith describes a few of the concepts and benefits of
using network-based datastores, including the use of iSCSI.
23
iSCSI
Target using Windows Server - 6 min
In
this Nugget, Keith demonstrates how to configure a Windows 2012
server as an iSCSI target. For instructions on how to set up an iSCSI
target using OpenFiler, please visit the iSCSI Nuggets in the vSphere
5.5 course for a complete walkthrough.
24
Add
an iSCSI Datastore - 14 min
In
this Nugget, Keith explains and demonstrates how to set up an ESXi
host to use an iSCSI based datastore.
25
iSCSI
Multipath - 14 min
In
this Nugget, Keith discusses and demonstrates implementing the iSCSI
multipath feature.
26
Create
NFS Datastores - 13 min
In
this Nugget, Keith walks you through the creation of a NFS share on a
Windows 2012 server, followed by the creation of a vSphere datastore
that uses the NFS share. For details on setting up OpenFiler as an
NFS server (instead of the Windows server as demonstrated in this
Nugget), please refer to the OpenFiler and NFS specific videos from
the vSphere 5.5 course.
27
vMotion
- 16 min
In
this Nugget, Keith describes and demonstrates the use of vMotion, and
migration within a vSphere environment.
28
Using
DRS - 15 min
In
this Nugget, Keith describes and demonstrates the usefulness of
Distributed Resource Scheduler (DRS) when used with a cluster in
vSphere.
29
Distributed
Switch Concepts - 4 min
In
this Nugget, Keith discusses how vSphere Distributed Switches (VDS)
can be used to make administering the network more centralized.
30
Implement
a Distributed Switch - 18 min
In
this Nugget, Keith demonstrates how to add a vSphere Distributed
Switch (VDS) for centralized management and configuration of
networking.
31
Networking
Policy Concepts (Standard vSwitch) - 17 min
In
this Nugget, Keith discusses networking policy options that can be
applied at the switch or port group level on standard switches.
32
Using
Standard vSwitch Policies - 18 min
In
this Nugget, Keith demonstrates implementing standard vSwitch
policies.
33
Migrate
VMK port to VDS - 14 min
In
this Nugget, Keith describes and demonstrates how to migrate a
VMKernel Port from a standard switch to a distributed switch.
34
Distributed
Switch Features - 11 min
In
this Nugget, Keith describes several features the vSphere Distributed
Switch (VDS) has to offer.
35
Increasing
a Datastore - 6 min
In
this Nugget, Keith discusses and demonstrates the expansion of an
iSCSI datastore to use additional storage available from the iSCSI
target on the same LUN.
36
Using
vApps - 16 min
In
this Nugget, Keith describes and demonstrates using vApps in a
vSphere environment. You are encouraged to practice everything
demonstrated in this (and other Nuggets) in your own practice lab to
increase your skills through hands-on practice.
37
CPU
and Memory Control Concepts - 16 min
In
this Nugget, Keith describes CPU and memory control concepts that may
be used in vSphere.
38
Implement
Reservations and Limits - 16 min
In
this Nugget, Keith demonstrates the setting up CPU reservations and
limits. The DSL VM (used in this video) is available as a .OVA file
from the NuggetLab files.
39
Resource
Pool Concepts - 15 min
In
this Nugget, Keith discusses the concepts of a resource pool.
40
Using
Resource Pools - 14 min
In
this Nugget, Keith demonstrates the implementation and verification
of resource pools.
41
Using
Storage DRS - 15 min
In
this Nugget, Keith describes and demonstrates Storage DRS in vSphere.
42
High
Availability (HA) - 14 min
In
this Nugget, Keith describes and demonstrates High Availability (HA)
in vSphere.
43
VM
Fault Tolerance (FT) - 13 min
In
this Nugget, Keith describes and demonstrates using VM Fault
Tolerance (FT) in vSphere.
44
Storage
Policy Concepts - 11 min
In
this Nugget, Keith discusses additional storage concepts, including
Storage Policies that can be applied to a VM.
45
Applying
VM Storage Policies - 9 min
In
this Nugget, Keith walks you through the creation and application of
a storage policy on a VM.
46
Virtual
SAN (VSAN) - 17 min
In
this Nugget, Keith explains and demonstrates creating a Virtual SAN
(VSAN).
47
Add
LDAP to SSO - 10 min
In
this Nugget, Keith describes and demonstrates adding Active Directory
using LDAP, as an identity source that can be used with vSphere
Single Sign-On (SSO). For information about permissions and access
privileges, please see the Nugget called "vSphere
Authorization
48
vSphere
Authorization - 12 min
In
this Nugget, Keith explains and demonstrates how to use roles to
provide permissions inside vSphere.
49
vSphere
Alarms and Alerts - 11 min
In
this Nugget, Keith explains and demonstrates creating and using
custom alarm definitions.
50-
Affinity
Concepts - 5 min
In
this Nugget, Keith describes the options and benefits of Affinity
Rules in vSphere. This is a "concepts" Nugget. The
implementation will be in the video titled: "Using Affinity
Rules"
51
Using
Affinity Rules - 14 min
In
this Nugget, Keith demonstrates the use of affinity rules in vSphere.
52
Customization
Specifications - 11 min
In
this Nugget, Keith describes and demonstrates using customization
specifications to modify a VM.
53
Content
Libraries - 9 min
In
this Nugget, Keith explains and demonstrates the use of Content
Libraries in vSphere.
54
Additional
Products and Features - 16 min
In
this Nugget, Keith introduces a few additional products and features
available from VMware.
55
Additional
Fishing Tools - 9 min
In
this Nugget, Keith shares some additional resources (and some
homework) that can be used to improve your skills and understanding
as you continue to study and master VMware vSphere.